WARNINGS FOR USING
In order to make solid surface products have a long service life, please pay attention to the following instructions:
· Do not expose the surface to strong acids or strong alkaline cleaners or aggressive liquids (e.g. sulphuric acid, hydrochloric acid, ammonia or drain cleaner etc.) for long time,please flush the surface with water in time.
· Do not scratch the surface directly with sharp objects (e.g. steel scourers, tools, etc.) and may leave scratches on the surface.
· Do not pouring liquids or putting articles that above 100℃ on surface which can make the surface deformated.
· Do not allow the surface to contact with red wine for long time, the surface may react with red wine and leave a red wine mark,please follow resistant stains cleaning way if there has red wine mark.
· Do not hit the surface hardly or hit the surface with a hammer, which may cause damage.
Please check the following content about how to clean,maintain and repair solid surface bathroom products:
CLEANING & MAINTAING
For solid surface bathtub & wash basin
DAILY CLEANING
Solid surface product is hardly to gather dirt on surface and it is easy to clean and maintain, It is recommended to clean any kind of dirt as soon as to keep the product in its best condition.
Daily cleaning only use a wet cloth with dish detergent or shower gel, please wipe the water with a towel in time as far as possible to keep the surface dry. The smooth and porous structure of surface prevents bacteria growing, and if disinfection is required, the surface can be wiped with diluted daily bleach or use other disinfectant potions.
RESISTANT STAINS CLEANING
Some stains such as cosmetics, coffee stains, tea stains, red wine stains,water furring etc.which stay on the surface for a long time that may became resistant stains,when the stains can not clear off by using wet cloth,we may think about to make a deeper decontamination,its step depends on the surface:
Matte surface: Flush water to the place where need to clean,to make cleaning in circle movement with grey scouring pad and standard dish detergent or shower gel,then wash and wipe with a dry towel.
Glossy surface:Flush water to the place where need to clean,to make cleaning in circle movement with sponge and standard dish detergent or shower gel,dirt which is difficult to remove that can be polished with 1200 water sanding paper and then wiped with a soft cloth and pledge cleaner.
If there’s any problem for repairing,please contact us:
SCRATCHES REPAIRING WAYS
Solid surface stone has a certain degree of scratching resistance, but scratches may be left inevitably by sharp objects, repairable is the greatest advantage of solid surface, its repaired method depends on the surface:
Matte surface: Flush water and make sanding with 400 or 600 mesh sanding paper until the scratches disappear, then restore it in original condition with detergent and scouring pad.
Glossy surface: Flush water and make sanding with 800 or 1200 mesh sanding paper, then make polishing with polished wax and polishing machine run on a low speed of 1500-2000rpm, then make cleaning with clean cotton cloth at last.
DAMAGED REPAIRING WAYS
Different with other materials such as marble, sintered stone, acrylic or other material,solid surface stone products can be repaired even if they were damaged, and some seemingly impossible damage such as cracks, missing angles etc. can be repaired by following repair steps as follows:
1.Use blade to clear off the damaged area.
2.Mix liquid material with solidified agent in proportion of 100ml:0.8ml.
3.Stir that liquid material at 1 minute.
4.Pour that liquid material into the damaged area.
5.Once it dryed,sanding with 120# sanding paper.
6.Then use 600# sanding paper at last.